FPV Race Quad Build

Components

Batteries/Charger

EV-Peak CQ3 Multi Charger 4x 100W NiMH / LiPO with Built-in Balance and EV-Peak Cellmeter-7 Battery Capacity Checker
Component Description Shops OEM Link Comment
Charger EV-Peak CQ3 Multi Charger 4x 100W NiMH / LiPO with Built-in Balance getfpv EV-Peak See OEM link for the manual
Battery Checker EV-Peak Cellmeter-7 Battery Capacity Checker getfpv, Banggood EV-Peak  
Battery Lumenier 1300mah 3S 60C Lipo Battery (XT60) getfpv OEM Link  

Flight Controller (FC) and Power Distribution Board (PDB)

Flight Controller MATEKSYS-F722 STD and Power Distribution Board MATEKSYS FCHUB-6S
Component Description Shops OEM Link Comment
Flight Controller MATEKSYS F722 STD STM32 Built in OSD BMP280 Barometer Blackbox getfpv, Banggood MATEKSYS See OEM link for the datasheet
PDB MATEKSYS FCHUB-6S W/ CURRENT SENSOR 184A, BEC 5V & 10V getfpv, Banggood MATEKSYS  

FPV-System (Goggles, Camera)

FPV system: FatShark HDO and RunCam Swift 2.
Component Description Shops OEM Link Comment
FPV Bundle Ultimate FPV Bundle - Fat Shark HDO, rapidFIRE, + Lumenier AXII 2 Diversity Antenna Bundle getfpv, FatShark, immersionRC, Lumenier See OEM links for the datasheets
Camera RunCam Swift 2 (2.5mm Lens) getfpv, Banggood RunCam  

Motors and ESC

EMAX RS2205/2300Kv Motors and DYS ARIA BLHELI 35A ESCs.
Component Description Shops OEM Link Comment
Motor EMAX RS2205/2300Kv RaceSpec Motor (CW) getfpv, Banggood EMAX See OEM Link for the Datasheet
ESC DYS ARIA BLHELI_32BIT 35A ESC getfpv, Banggood dys  

Props

Receiver

The following receiver from FrSky will be installed in the quad and should be used together with a FrSky transmitter.

Leave a comment